SDR- receiver USG-30

USG-30A

USG-30A is an SDR mono block receiver with 1GBit/s LAN interface for stationary operations. With two USG-30A, it is possible to use a two-channel synchronous and asynchronous operation mode. Asynchronous mode allows you to automate the process of analyzing and recording detected signals without having to stop scanning the master complex.

 

 

 

 

 

 

USG-30-Professional

USG-30-Professional is one of the most powerful mobile TSCM radio monitoring and signal analysis systems. It has a powerful laptop to ensure IQ analysis, an integrated 4 port antenna switch and an integrated battery for mobile applications.

 

 

 

 

 

 

 

 

Technical specification of USG-30 SDR receivers

Frequency range:

9 kHz-30 GHz
(Input 1: 25 MHz-9GHz/ Input 2: 9GHz-30GHz/ Input 3: 9kHz-25MHz)


Function:

High-speed radio monitoring and digital signal analysis


Maximum tuning speed:
200 GHz/sec (RBW 54 kHz)

>100 GHz/sec (RBW 13 kHz)
 

Sensitivity (without preamplifier):

minus 158 dBm/Hz
 

Dynamic range (without attenuator):

more than 105 dB
 

Dynamic range for intermodulation:

90dB distortion of the 2nd and 3rd order
(with a s/w ratio of 10 dB)        

Selectivity on the neighboring and
mirror channel of receiver reception:

90dB 

Bandwidth, recording, and analysis of IQ data:

0.256-32 MHz (11 MHz without IQ recording time limit)

Maximum frequency resolution:

2 Hz

Types of software demodulator’s:

АМ, FМ, IQ, TETRA, APCO-P25, DMR, dPMR, NXDN

Types of analyzed digital communication standards:

TETRA, APCO-P25, DMR, dPMR, NXDN, PAL/SECAM/NTSC,

Bluetooth (receiving MAC and LAP addresses of detected

devices), DECT (RFPI address), 802.15.4(Zigbee and etc.),

DVB-T2 (till receiving fragments of a TV image), DVB-T (till

receiving fragments of a TV image) GSM (topology of

base stations), 3G- UMTS (topology of base stations),

4G (topology of base station)

Operating mode:

24/7

Cooling method for the receiving:

USG-30- active cooling/ low noise

Unique features:

Connection to a set of fire and other sensors with

information about alarms displayed in the software
   
Network connection interface:
LAN 1 Gb/s

Power supply:

~220V/50Hz    9-36 V-

Battery:

LIFePO4 (USG-30 Professional)

Operating temperature range:

+5°C up to +70°C  (without cooling/ heating module)

Storage temperature range:

-40°C up to +70°C

 

  • Efficient, effective, 24x7 electromagnetic spectrum monitoring and signal of interest highspeed capture

  • Expert analysis of spectral and amplitude-frequency-time characteristics of received signals

  • Analysis of IQ data for signal classification and modulation analysis

  • Interfaces to a wide range of spectrum analyzes and COMINT/ SIGINT/ TSCM receivers with new instruments being constantly added, and customization available at nominal cost

  • Effective detection of clandestine or illicit signals using differences in panoramic display spectral masks, by displaying signal characteristics on a unique axis-variable 3 dimensional waterfall display, using geo-graphically diverse antennas for signal power difference detection, incorporating adjustable thresholds for signal detection, automatically providing an ‘exceedance list’ of signals that exceed defined thresholds

  • Comprehensive software tools for detection and recognition of low probability of intercept and complex clandestine signals which use sophisticated cloaking techniques: frequency division multiple access (FDMA), short burst transmissions, ultra- wideband and noise-like emissions, masking as authorized signals and narrow-band transmission (snuggling) in authorized spectrum

  • Saving of results (baseline, average, peak and difference spectrums and panoramic displays) for post- monitoring analysis and comparison to previous saved results;

  • Signals analysis of IQ Data for DECT, BlueTooth, GSM, UMTS, LTE, TETRA, APCO25, DMR, dPMR, NXDN, 802.15.4, DVB-T,, DVB-T2 Analog TV (PAL/ SECAM/ NTSC) DRM, Mobile Radio Trunking and hardware-based WiFi analysis

  • Wide range of program tools for radio monitoring results’ analysis

  • Automated tools for audio demodulation and recording

  • Remote control over TCP/IP network including transfer of demodulated audio signal in real time

  • Electromagnetic compatibility research, analysis of effectiveness of frequency spectrum use, searching for radio interference sources

  • Built-in tools for documentation of results.

Radio monitoring network with digital signal analysis and direction finding

The customer can create and operate a worldwide radio monitoring network of USG-9 receivers with a one or more monitoring & control center (MCC)/ subcenters. Status information’s of the receiver positions are forwarded over VPN channels to the MCC. The program I_Remote Check displays information’s about the detection of unauthorized signals, the operation of the receivers, their activation and deactivation, as well the exact position of the sensor in a facility plan or in geographic information system. Over VPN channels the MCC has access to all functions of the remote USG-9 receivers.

  • Efficient, effective, 24x7 electromagnetic spectrum monitoring and signal of interest highspeed capture

  • Expert analysis of spectral and amplitude-frequency-time characteristics of received signals

  • Analysis of IQ data for signal classification and modulation analysis

  • Interfaces to a wide range of spectrum analyzes and COMINT/ SIGINT/ TSCM receivers with new instruments being constantly added, and customization available at nominal cost

  • Effective detection of clandestine or illicit signals using differences in panoramic display spectral masks, by displaying signal characteristics on a unique axis-variable 3 dimensional waterfall display, using geo-graphically diverse antennas for signal power difference detection, incorporating adjustable thresholds for signal detection, automatically providing an ‘exceedance list’ of signals that exceed defined thresholds

  • Comprehensive software tools for detection and recognition of low probability of intercept and complex clandestine signals which use sophisticated cloaking techniques: frequency division multiple access (FDMA), short burst transmissions, ultra- wideband and noise-like emissions, masking as authorized signals and narrow-band transmission (snuggling) in authorized spectrum

  • Saving of results (baseline, average, peak and difference spectrums and panoramic displays) for post- monitoring analysis and comparison to previous saved results;

  • Signals analysis of IQ Data for DECT, BlueTooth, GSM, UMTS, LTE, TETRA, APCO25, DMR, dPMR, NXDN, 802.15.4, DVB-T,, DVB-T2 Analog TV (PAL/ SECAM/ NTSC) DRM, Mobile Radio Trunking and hardware-based WiFi analysis

  • Wide range of program tools for radio monitoring results’ analysis

  • Automated tools for audio demodulation and recording

  • Remote control over TCP/IP network including transfer of demodulated audio signal in real time

  • Electromagnetic compatibility research, analysis of effectiveness of frequency spectrum use, searching for radio interference sources

  • Built-in tools for documentation of results.

Radio monitoring network with digital signal analysis and direction finding

The customer can create and operate a worldwide radio monitoring network of USG-30 receivers with a one or more monitoring & control center (MCC)/ subcenters. Status information’s of the receiver positions are forwarded over VPN channels to the MCC. The program I_Remote Check displays information’s about the detection of unauthorized signals, the operation of the receivers, their activation and deactivation, as well the exact position of the sensor in a facility plan or in geographic information system. Over VPN channels the MCC has access to all functions of the remote USG-9 receivers.