SDR- receiver USG-9000A
USG-9A (9kHz - 9GHz)
USG-9A is an SDR mono block receiver with 1GBit/s LAN interface for stationary operations. With two USG-9A, it is possible to use a two-channel synchronous and asynchronous operation mode. Asynchronous mode allows you to automate the process of analyzing and recording detected signals without having to stop scanning the master complex.
USG-9M (9kHz - 9GHz)
USG-9M is an SDR mono block receiver with integrated CPU mainboard incl. RadioInspector- software package for stationary, mobile and autonomous outdoor stand-alone operation.
USG-9M has a built-in battery package for independent operation up to 6 hours. USG-9M is ready for back pack operation and has a passive cooling system.
USG-9-Professional (9kHz - 9GHz)
USG-9-Professional is one of the most powerful mobile (customized) TSCM radio monitoring and signal analysis systems. It has a powerful laptop to ensure IQ analysis, an integrated 4 port antenna switch and an integrated battery for mobile applications.
Technical specification of USG-9 SDR receivers
Frequency range:
9 kHz-9 GHz
(Input 1: 9 kHz-25 MHz/ Input 2: 25-9000 MHz)
Function:
High-speed radio monitoring and digital signal analysis
Maximum tuning speed:
200 GHz/sec (RBW 54 kHz)
>100 GHz/sec (RBW 13 kHz)
Sensitivity (without preamplifier):
minus 158 dBm/Hz
Dynamic range (without attenuator):
more than 105 dB
Dynamic range for intermodulation:
90dB distortion of the 2nd and 3rd order
(with a s/w ratio of 10 dB)
Selectivity on the neighboring and
mirror channel of receiver reception:
90dB
Bandwidth, recording, and analysis of IQ data:
0.256-32 MHz (11 MHz without IQ recording time limit)
Maximum frequency resolution:
2 Hz
Types of software demodulator’s:
АМ, FМ, IQ, TETRA, APCO-P25, DMR, dPMR, NXDN
Types of analyzed digital communication standards:
TETRA, APCO-P25, DMR, dPMR, NXDN, PAL/SECAM/NTSC,
Bluetooth (receiving MAC and LAP addresses of detected
devices), DECT (RFPI address), 802.15.4(Zigbee and etc.),
DVB-T2 (till receiving fragments of a TV image), DVB-T (till
receiving fragments of a TV image) GSM (topology of
base stations), 3G- UMTS (topology of base stations),
4G (topology of base station)
CPU (USG-9M only):
Intel Core I7 97000
RAM 16 GByte DDR4 SDD 500 GByte M2
User interface is a HDMI- USB- Touch screen
Operating mode:
24/7
Cooling method for the receiving:
USG-9A- active cooling/ low noise fan
USG-9M- passive cooling
Unique features:
Connection to a set of fire and other sensors with
information about alarms displayed in the software
Network connection interface:
LAN 1 Gb/s
Power supply:
~220V/50Hz 9-36 V-
Battery:
LIFePO4 (USG-9 Professional)
Operating temperature range:
+5°C up to +70°C (without cooling/ heating module)
Storage temperature range:
-40°C up to +70°C
-
Efficient, effective, 24x7 electromagnetic spectrum monitoring and signal of interest highspeed capture
-
Expert analysis of spectral and amplitude-frequency-time characteristics of received signals
-
Analysis of IQ data for signal classification and modulation analysis
-
Interfaces to a wide range of spectrum analyzes and COMINT/ SIGINT/ TSCM receivers with new instruments being constantly added, and customization available at nominal cost
-
Effective detection of clandestine or illicit signals using differences in panoramic display spectral masks, by displaying signal characteristics on a unique axis-variable 3 dimensional waterfall display, using geo-graphically diverse antennas for signal power difference detection, incorporating adjustable thresholds for signal detection, automatically providing an ‘exceedance list’ of signals that exceed defined thresholds
-
Comprehensive software tools for detection and recognition of low probability of intercept and complex clandestine signals which use sophisticated cloaking techniques: frequency division multiple access (FDMA), short burst transmissions, ultra- wideband and noise-like emissions, masking as authorized signals and narrow-band transmission (snuggling) in authorized spectrum
-
Saving of results (baseline, average, peak and difference spectrums and panoramic displays) for post- monitoring analysis and comparison to previous saved results;
-
Signals analysis of IQ Data for DECT, BlueTooth, GSM, UMTS, LTE, TETRA, APCO25, DMR, dPMR, NXDN, 802.15.4, DVB-T,, DVB-T2 Analog TV (PAL/ SECAM/ NTSC) DRM, Mobile Radio Trunking and hardware-based WiFi analysis
-
Wide range of program tools for radio monitoring results’ analysis
-
Automated tools for audio demodulation and recording
-
Remote control over TCP/IP network including transfer of demodulated audio signal in real time
-
Electromagnetic compatibility research, analysis of effectiveness of frequency spectrum use, searching for radio interference sources
-
Built-in tools for documentation of results.
Radio monitoring network with digital signal analysis and direction finding
The customer can create and operate a worldwide radio monitoring network of USG-9 receivers with a one or more monitoring & control center (MCC)/ subcenters. Status information’s of the receiver positions are forwarded over VPN channels to the MCC. The program I_Remote Check displays information’s about the detection of unauthorized signals, the operation of the receivers, their activation and deactivation, as well the exact position of the sensor in a facility plan or in geographic information system. Over VPN channels the MCC has access to all functions of the remote USG-9 receivers.
